After making the blue silk blouse I posted about last time, I started wondering what else could be made with a similarly (ridiculously) simple pattern.
I came up with this nifty skirt:
In hindsight the outcome would’ve been better with a drapier or stretchier fabric, but… oh well.
As you can see, it’s just a rectangle with ties (I made mine asymmetrical so that the knot wouldn’t be exactly in the centre).
You can tie the straps to the front or to the back, loose or tight, so this is a nicely versatile piece of clothing.
The How-To Part Of The Tutorial
In addition to fabric you’ll need a zipper. The amount of fabric you need and the length of your zipper will depend on your size, but for reference I used about 1,5 m of fabric and a 30 cm invisible zip.
So, here’s what you’re going to cut out from the fabric (remember to add seam allowance though):
Add a little more seam allowance to the sides of the back piece than to the front one, since it will have a seam in the center (or slightly to the side if you go asymmetrical like me). If you’re cutting the front and back pieces at the same time, from a double layer of fabric, remember to cut the back piece in half afterwards.
Start by sewing and turning the straps as shown below.
Next, pin and sew two of the back waistband pieces to the pack pieces like so:
Then do the same with one of the front waistband pieces and the front piece:
After this, pin and sew the back and front together, but don’t do anything to the side seams at this point. And remember, when you eventually turn the skirt, you’ll have to snip a bit at the corners next to the waistband to get the thing turned nice and neat.
Next, sew the side seams, making sure that the straps are sandwiched between the front and back pieces.
Then, sew in the zipper. I used an invisible zipper presser foot to sew in my zip — something I’ve never used before, but it worked phenomenally well. After sewing in the zipper, sew up the rest of the back seam (unless your using a normal zipper, then I guess you can do it in the order you prefer).
Now pin and hem the hem (man that sounds silly).
Sew together the remaining waist band pieces, and then pin and sew them to the waistband already attached to the skirt, right sides together. Turn and iron down, making sure that the area around the zipper is nice and neat. After this, hand stitch the turned waistband to the skirt, along the seam where my thumb is on in the pic below:
Now just iron the finished skirt and you’re done! Yay! I hope my instructions weren’t to complicated :)